Archos Video AV120 Battery Installation Guide
The instructions below come with no warranty or guarantee, proper or improper assembly or use of excessive force may result in damage to the parts involved or to your PDA/Mp3 Player. By utilizing these instructions, you agree to hold Laptops For Less blameless and unaccountable for damages or problems caused by use of these instructions. These instruction require a moderate level of technical ability and proficiency in the use of hand tools, as well as a general understanding of electronic components. Buyer assumes full responsibility for the installation of this replacement battery.

Step 1:

Using the included Philips screwdriver remove the two screws from the battery cover located at the top of the PDA.

 

 Step 2:

With the screws removed, pull and hold the battery cover downward.

Step 3:

While still holding downward, pull the battery cover away from the PDA and remove it from the device.

 

 Step 4:

Remove the battery by tipping the top portion of the device towards the floor. A slight shaking of the device should be enough to allow the battery to slip out. If the battery does not come out the entire way, pull it out with your fingers.

Install the new battery by sliding it into the compartment. Please pay attention to have the original battery orientation (label up, minus towards top of PDA). Reapply the battery compartment cover and put back the two screws.

Your new battery will need a minimum of three hours of charging before first use.
©1997- 2005
All Rights Reserved. All offers and prices are subject to change without notice.

Back